Table of Contents
Advertisement
"Security" Menu
SOS key: you can define what the SOS key does (Forum Free 588).
Either the emergency call number is dialled immediately (SOS
call: immediately) or just after being pressed again (SOS call:
with confirmation).
Alarm sensor (Forum Free 588 only): Please read the description of the
alarm sensor on page 48 before making configurations.
Alarm number: If the SOS emergency call number is predefined by the
system, this menu entry does not appear.
Enter the alarm call number to be dialled when there is a sensor
alarm.
Forum 500 / Forum 5000 systems only: You can prefix the
call number with the R key function (enquiry) by pressing the
key 3 times. Then an alarm call can also be made during a call
(depending on mobile unit).
Other systems: The "Hold" function may be generated using
other codes on other systems. The respective system documen-
tation provides information on suitable programming.
Alarm auto answer: You can configure whether a call from any call
number is automatically answered during a prealarm. No matter
what the setting, calls from the alarm call number or the SOS
emergency call number are automatically accepted and
prealarm ended.
Handsfree in alarm: You can configure whether an alarm call is done in
handsfree or receiver operation. This setting also applies to the
emergency call via the SOS/emergency call key.
Pre alarm: Use
off.
Alarm tone: The pre-alarm can be sounded with or without an
Vibrator: You can set whether the pre-alarm should also be
Duration: You can set the time (10 sec ... 75 sec) that should
138
Change to switch the pre-alarm for all alarm types on or
alarm tone on the handset. If the alarm tone is activated,
the signalling volume increases progressively.
signalled with vibrator call.
elapse before the emergency number is dialled. An
increasingly loud ring tone (alarm tone) is signalled on the
handset during this time (provided it is activated).
The Device Menu
Advertisement
Table of Contents
