Table of Contents
Advertisement
supported, this quality level is maintained. This is the standard
setting.
Automatic: Attempts are always made to establish a connection in high
speech quality. If the device is located in a XQ-protected envi-
ronment, then incoming or outgoing connections are made in
standard speech quality. Switch on this mode if you switch regu-
larly between areas (XQ / office) and still wish to use Hi-Q audio
in the office.
"System" Menu
New system: Enter the authentication code and the PARK code optionally.
For more information on this, consult your system administrator.
Subscription:
Auto search: The mobile unit automatically checks in to the currently
available system with the strongest signal. The mobile unit can
only check in to the relevant system if it has previously been
subscribed to that system. Please contact your system adminis-
trator if necessary.
[System 1...10]: List of systems where the mobile unit is already
subscribed. The selected system is highlighted. Select an entry
via the navigation keys. The mobile unit attempts to establish a
connection with
Press
not have to be changed. The following settings should be made
by the system administrator.
Character set shows the character set used by the editor.
Details displays additional device data.
Use Delete to delete the subscription for the corresponding
system.
Stop searching: this designates the mobile unit as absent on the
system. This function is helpful on some systems if the system
does not detect that the device is switched off and then e.g.
activate call forwarding in this case.
The Device Menu
.
to query and set additional options. These usually do
"System" Menu
115
Advertisement
Table of Contents
