Table of Contents
Advertisement
"Security" Menu
Escape alarm: Use
Alarm in conversation: Switch off this feature to prevent alarm
Delay: Allows you to set the amount of time the handset can be
Sensibility: Allows you to set the sensitivity (Low, Medium,
Repeat alarm: This is the time interval after which another prealarm
including subsequent dialling of the alarm call number is
executed, e.g. because calling the alarm call number was
cancelled (Off, 5 sec ... 240 sec). Use
tition of an alarm on or off.
Reset to default: You can reset various areas of your settings back to factory
settings.
Personal directory: The entries in your personal phone book are
deleted after a confirmation prompt.
VIP-list: the VIP list (see page 45) is deleted.
140
movements (e.g. ways of walking) of the surveillance
personnel.
– Low sensibility means: Slow movements are enough to
reset the delay once again.
– High sensibility means: Only rapid (jolting) movements
will reset the delay.
Please switch "Vibra call" off in the "Ringer settings" (see
page 113) if you wish to use the no movement alarm.
Change to switch the escape alarm on or off.
activation by mistake during an active call.
in rapid movement before a pre-alarm is triggered (1 sec ...
75 sec).
High). This allows you to adapt the sensor to the different
movements (e.g. running movement) of the surveillance
personnel.
– Low sensibility means: The alarm is triggered only by
rapid or jolting movements.
– High sensibility means: Slower movements are enough
to trigger the alarm.
Please switch "Vibra call" off in the "Ringer settings" (see
page 113) if you wish to use the escape alarm.
Change to switch the repe-
The Device Menu
Advertisement
Table of Contents
