Proximus Forum Free 568 User Manual page 131

Call pick-up
Pick-up: You pick up the call intended for another telephone in your
pick-up group.
If the called subscriber belongs to a user group with pickup
protection activated, you cannot pick up calls for that person's
call number.
Pick-up select. (Pickup selective): After entering the call number, you
pick up the call for any other telephone.
If the called subscriber belongs to a user group with pickup
protection activated, you cannot pick up calls for that person's
call number.
Note: If the other telephone is already in the call state (e.g. an
answering machine is making an announcement), you can pick up the
call with "Pickup select.". The subscriber for whom you picked up the
call must belong to a user group for which "Call removal" authorisation
is activated, otherwise "Pick-up select" is not possible.
Take: You wish to take a current call from one terminal over to your
DECT telephone and continue the call on the DECT telephone. To
do so, your DECT telephone and the other terminal must have
the same internal call number.
Dial
Announcement: You direct an announcement to other system
terminals (please refer to page 87). Enter the call number of the
subscriber to whom you wish to transfer under Dest:. Announce-
ments can also be directed to call numbers where multiple
subscribers can be reached (e.g. a hunt group call number).
Note: If a called subscriber has announcement protection on (see
page 127), this feature is not executed.
Intercom: This function is for directing an announcement to a single
system terminal and the microphone is switched on the system
terminal called (please refer to page 87). The subscriber called
can answer you immediately without having to press a key. Enter
the device ID of the terminal in Device-ID:. For information on
the device IDs available, contact your system administrator.
Note: If a called subscriber has call waiting protection on (see
page 128), this feature is not executed.
The Device Menu
"System menu" / Main Menu
129