Initial Start-Up; Switching On; Fig. 8 Start-Up Screen - Zeiss VISUREF 150 User Manual

Initial start-up

Switching on

Switch on the device using the power switch (6, Fig. 5).
•
After the device has been started (booted), the start-up screen will be
•
displayed.
Fig. 8 Start-up screen
During initial start-up of the device or after a reset to factory settings, an
input mask will be displayed for device initialization.
In all other cases, the measurement screen with the pre-set measurement
mode will be shown after the start-up screen.
Initial start-up
000000-2227-967-GA-GB-281021
27