84
000000-2227-967-GA-GB-281021
Operation of the device
Review of completed measurements
The list of completed measurements can be accessed via the pull-down
menu (5, Fig. 22) or, if a patient list exists, via the menu item (3, Fig. 22). To
review the results of a measurement that has already been completed,
proceed as follows:
Select a measurement from the displayed list to open the measurement.
•
Navigate through the various elements of the open measurement.
•
Output of measurement results
Measurement results can be output using the Finish button.
This button has two functions. On the left side (the word Finish with the
printer symbol) the preselected default option can be selected and released
immediately. On the right side (with the arrow pointing upwards) a pop-up
window will open to get access to other pre-configured output options
(Fig. 56).
For a detailed description of all possible output options see Section Device
settings, Output submenu, page 92.
Fig. 56
Finish pop-up window with various output options