Zeiss VISUREF 150 User Manual page 102

96
Parameter
Basic settings Interface enablement
Printer (local)
Serial
USB
Local area network (LAN)
Printer
Folder
Socket
Web service
User Page 1/3: Display
Screensaver
Brightness
Display date
Display time
* indicates default values
000000-2227-967-GA-GB-281021
Operation of the device
Description
Activation of a local printer on the
device
Activation of data output to a serial
interface of the device
Activation of data output to a USB
drive connected to the device
Supporting element to enable or
disable all output options of the
network interface
Enabling data output on network
printer
Enabling data input/output via
network folder
Enabling direct data output on
EMR/PMS application within the
network
Enabling the web service interface of
the device
Defines the duration after which the
screen saver is automatically enabled
or disables the screen saver.
If PIN protection is enabled, the device
is automatically blocked.
Selecting screen brightness
Date display on measurement screens
Time display on measurement screens
Selection and input options
Enabled*
Disabled
Enabled*
Disabled
Enabled
Disabled*
Enabled
Disabled*
Enabled
Disabled*
Enabled
Disabled*
Enabled
Disabled*
Enabled*
Disabled
5 min.
15 min.*
30 min.
Disabled
Scale between "Low" (0) and
"High" (100), default: 75*
Enabled*
Disabled
Enabled*
Disabled