Subsequent Patient Allocation - Zeiss VISUREF 150 User Manual

Subsequent patient allocation

If a measurement is performed without allocating it to a patient, the
allocation can be done after finalizing the measurement. Proceed as follows:
Activate this option in the device settings by entering the parameters of
•
your EMR/PMS system in the Output/Advanced/Data allocation menu.
Tap the Finish button to finalize the measurement.
•
Define the patient search by entering text into the text input field which
•
will open then (Fig. 23).
The following search patterns are possible for ZEISS i.Com mobile:
"Family name[, Given name][; Gender][; Date of birth]"
•
– With the exception of the family name, all elements of the pattern are
optional.
– The different elements can only partially describe the searched data
record.
– The abbreviations "m" (male), "f" (female) or "d" (diverse) can be used
as search terms for gender.
– The date of birth must be entered in the format "YYYY-MM-DD".
Examples: the following search definitions are possible
•
– „Thom;f" finds all female patients with the family names Thomas,
Thomson or Thompson etc.
– "Doe, J;m;1966" finds all male patients with the year of birth 1966
and family names like Doe, John, James etc.
– "1968-11-19" finds all patients born on 19 November 1968.
"#ID":
•
– ID is the identification number of the searched patient in the searched
patient database or the first part of this number.
Depending on the type of EMR/PMS integration, this step may be

skipped and existing patient selection may be accessed.
Operation of the device
000000-2227-967-GA-GB-281021
49