Zeiss VISUREF 150 User Manual page 104

98
Parameter
Serial port
Baud rate
Number of bits - Data
Number of bits - Stop
Parity
Handshaking
Output format
Output protocol
USB interface
Output path 1
Output format 1
Output path 2
Output format 2
* indicates default values
000000-2227-967-GA-GB-281021
Operation of the device
Description
Setting of baud rate in serial interface
Selection of the number of data bits
Selection of the number of stop bits
Setting of parity in serial interface
Setting of handshaking in serial
interfaces
Setting of output format of serial
interface
Setting of the protocol of serial interface Blind transmission*
Definition of output path 1 for saving
measurement data on a USB drive.
Definition of an output path format for
storage on the output path 1 USB drive.
Definition of output path 2 for saving
measurement data on a USB drive.
Please note that ZEISS VISUREF 150 does
not create any folders itself. The folders
must already be available on the USB
memory stick.
Definition of an output path format for
storage on the output path 2 USB drive.
Selection and input options
9600 Bd*
19200 Bd
38400 Bd
57600 Bd
115200 Bd
7 bits
8 bits*
1 bit*
2 bits
None*
Odd
Even
None*
Software Xon/Xoff
Hardware RTS/CTS
v1.6* Compatibility
v1.7
Other formats depend on installation
Other protocols depend on installation
Text input of output path
Default*: data\txt
v1.6*
v1.7
XML JOIA
PDF simple
PDF enhanced
Other formats depend on installation
Text input of output path
Default*: data\pdf
v1.6
v1.7
XML JOIA
PDF simple
PDF enhanced*
Other formats depend on installation