Initial Commissioning; Operation; Inserting A Cell - Xylem wtw pHotoFlex pH Quick Start Manual

®
pHotoFlex pH
Switching on the meter
Setting the language
Setting the date and
ba75977d04 11/2018

Initial commissioning

Press the <ON/OFF> key.
For a few seconds, the Start menu appears with a selection of the
measuring modes. The measuring mode last selected is highlighted.
After a few seconds, the meter automatically switches to the measuring
mode and measured parameter used last.
The English language is set on delivery. Set a different language as
follows:
1 Open the Configuration menu with the <MENU> key.
2 Open the Configuration / System / Language menu with the
<> <> and <START/ENTER> keys.
Select the required language with the <> <> keys and
3
confirm with <START/ENTER>.
4 Quit the menu with the <M> key.
The date and time are set in the menu,
time Configuration / System / Continue ... / Date/time.

Operation

Inserting a cell

To be able to insert cells in the pHotoFlex
prepared to take in a cell.
1 Push the dust cover (1) upward.
The cell shaft for 28 mm cells is open.
 Insert a 28 mm cell (see below)
 Insert a 16 mm cell (see page 10)
1
Operation
®
pH, the cell shaft has to be
9