Dhcp Connection - peplink Pepwave MAX 700 User Manual

Dynamic DNS
Service Provider
9.1.1

DHCP Connection

There are four possible connection methods:
1. DHCP
2. Static IP
3. PPPoE
4. L2TP
The DHCP connection method is suitable if the ISP provides an IP address automatically
using DHCP (e.g., satellite modem, WiMAX modem, cable, Metro Ethernet, etc.).
Routing Mode
IP Address/ Subnet
Mask/ Default
https://www.peplink.com
Dynamic DNS Settings
This setting specifies the dynamic DNS service provider to be used for the WAN based
on supported dynamic DNS service providers:
● changeip.com
● dyndns.org
● no-ip.org
● tzo.com
● DNS-O-Matic
Select Disabled to disable this feature. See Section 9.5 for configuration details.
DHCP Connection Settings
NAT allows substituting the real address in a packet with a mapped address
that is routable on the destination network. By clicking the help icon in this
field, you can display the IP Forwarding option, if your network requires it.
This information is obtained from the ISP automatically.
108 Copyright @ 2021 Pepwave