Captive Portal - peplink Pepwave MAX 700 User Manual

8.3

Captive Portal

The captive portal serves as a gateway that clients have to pass if they wish to access the
internet using your router. To configure, navigate to Network>LAN>Captive Portal.
Enable
Hostname
Access Mode
RADIUS Server
LDAP Server
https://www.peplink.com
Captive Portal Settings
Check Enable and then, optionally, select the LANs/VLANs that will use the
captive portal.
To customize the portal's form submission and redirection URL, enter a new URL
in this field. To reset the URL to factory settings, click Default.
Click Open Access to allow clients to freely access your router. Click User
Authentication to force your clients to authenticate before accessing your
router.
This authenticates your clients through a RADIUS server. After selecting this
option, you will see the following fields:
Fill in the necessary information to complete your connection to the server and
enable authentication.
This authenticates your clients through a LDAP server. Upon selecting this
option, you will see the following fields:
102 Copyright @ 2021 Pepwave