The Pepwave Router Behind A Nat Router - peplink Pepwave MAX 700 User Manual

A - Advanced feature, please click the
Peplink proprietary SpeedFusion
have a firewall in front of your Pepwave devices, you will need to add firewall rules for these ports and protocols to
allow inbound and outbound traffic to pass through the firewall.
Want to know more about VPN sub-second session failover? Visit our YouTube Channel for a video
tutorial!

13.2 The Pepwave Router Behind a NAT Router

Pepwave routers support establishing SpeedFusion
a NAT (network address translation) router.
To enable a WAN connection behind a NAT router to accept VPN connections, you can
configure the NAT router in front of the WAN connection to inbound port-forward TCP port 32015
to the Pepwave router.
https://www.peplink.com
When Faster is selected, a health check packet is sent every second, and the
expected detection time is two seconds.
When Extreme is selected, a health check packet is sent every 0.1 second, and the
expected detection time is less than one second.
button on the top right-hand corner to activate.
Important Note
TM uses TCP port 32015 and UDP port 4500 for establishing VPN connections. If you
http://youtu.be/TLQgdpPSY88
Tip
TM over WAN connections which are behind
150 Copyright @ 2021 Pepwave