Sms Control - peplink Pepwave MAX 700 User Manual

26.8 SMS Control

SMS Control allows the user to control the device using SMS even if the modem does not have
a data connection. The settings for configuring the SMS Control can be found at System>SMS
Control.
Note: Supported Models
● Balance/MAX: *-LTE-E, *-LTEA-W, *-LTEA-P, *-LTE-MX
● EPX: *-LW*, *-LP*
When this box is checked, the device will be allowed to take actions according to received
commands via SMS.
Make sure your mobile plan supports SMS, and note that some plans may incur additional
charges for this.
SMS Control can reboot devices and configure cellular settings over signalling channels, even
if the modem does not have a data connection.
For details of supported SMS command sets, please refer to our
Enable
Password
White List
https://www.peplink.com
SMS Control Settings
Click the checkbox to enable the SMS Control.
This setting sets the password for authentication - maximum of 32 characters, which
cannot include semicolon (;).
Optionally, you can add phone number(s) to the whitelist. Only matching phone
numbers are allowed to issue SMS commands. Phone numbers must be in the
E.164 International Phone Numbers format.
knowledge
247
base.
Copyright @ 2021 Pepwave