Pppoe Connection - peplink Pepwave MAX 700 User Manual

9.1.3 PPPoE Connection

This connection method is suitable if your ISP provides a login ID/password to connect via
PPPoE.
Routing Mode
IP Address /
Subnet Mask /
Default Gateway
PPPoE Username /
Password
Confirm PPPoE
Password
https://www.peplink.com
through this connection. Selecting Obtain DNS server address automatically
results in the DNS servers being assigned by the WAN DHCP server to be used
for outbound DNS lookups over the connection. (The DNS servers are obtained
along with the WAN IP address assigned from the DHCP server.) When Use the
following DNS server address(es) is selected, you may enter custom DNS server
addresses for this WAN connection into the DNS Server 1 and DNS Server 2
fields.
PPPoE Settings
NAT allows substituting the real address in a packet with a mapped address
that is routable on the destination network. By clicking the help icon in this field,
you can display the IP Forwarding option, if your network requires it.
This information is obtained from the ISP automatically.
Enter the required information in these fields in order to connect via PPPoE to
the ISP. The parameter values are determined by and can be obtained from
the ISP.
Verify your password by entering it again in this field.
110 Copyright @ 2021 Pepwave