Recovery
Retries
Dynamic DNS
Service
Provider
MTU
9.3
Wi-Fi WAN
To access Wi-Fi WAN settings, click Network>WAN>Details.
https://www.peplink.com
This is the number of responses required after a health check failure before treating a
connection as up again.
Dynamic DNS Settings
This setting specifies the dynamic DNS service provider to be used for the WAN based
on supported dynamic DNS service providers:
●
changeip.com
●
dyndns.org
●
no-ip.org
●
tzo.com
●
DNS-O-Matic
Select Disabled to disable this feature. See Section 9.5 for configuration details.
This field is for specifying the Maximum Transmission Unit value of the WAN connection.
An excessive MTU value can cause file downloads stall shortly after connected. You may
consult your ISP for the connection's MTU value.
MTU
118
Copyright @ 2021 Pepwave