Bgp - peplink Pepwave MAX 700 User Manual

Authentication
Interfaces
PepVPN Route
Isolation
Network
Advertising
Static Route
Advertising

20.2 BGP

Click the Advanced tab from the top bar, and then click the Routing Protocols>BGP item on
the sidebar to configure BGP.
Click "x" to delete a BGP profile.
Click "Add" to add a new BGP profile.
https://www.peplink.com
RIPv2 Settings
Choose an authentication method, if one is used, from this drop-down menu.
Available options are MD5 and Text. Enter the authentication key next to the drop-
down menu.
Determine which interfaces this group will use to listen to and deliver RIPv2 packets.
OSPF & RIPv2 Route Advertisement
Isolate PepVPN peers from each other. Received PepVPN routes will not be
forwarded to other PepVPN peers to reduce bandwidth
Networks to be advertised over OSPF & RIPv2. If no network is selected, all LAN /
VLAN networks will be advertised by default.
Enable this option to advertise LAN static routes over OSPF & RIPv2. Static routes
that match the Excluded Networks table will not be advertised.
188
consumption..
Copyright @ 2021 Pepwave