Gpio Menu; Ntp Server - peplink Pepwave MAX 700 User Manual

GPIO Menu

The Ignition Sensing options are available in Advanced > GPIO
The configurable option for Ignition Input is Delay; the time in seconds the router stays
powered on after the ignition is turned off.
Still under development:
O/P (connected to I/O pin on 4 pin connector) can be configured as a digital input, digital output
or analog input.
Digital Input - the connection supports input sensing; it reads the external input and determine
if the settings should be 'High' (on) or 'Low' (off).
Digital Output - when there is a healthy WAN connection, the output pin is marked as 'High'
(on). Otherwise, it will be marked as 'Low' (off).
Analog Input - to be confirmed. In most cases should read the external input and determine the
voltage level.

22.8 NTP Server

Pepwave routers can now serve as a local NTP server. Upon start up, it is now able to provide
connected devices with the accurate time, precise UTC from either an external NTP server or
via GPS and ensuring that connected devices always receive the correct time.
https://www.peplink.com 208 Copyright @ 2021 Pepwave