Table of Contents
Advertisement
Buzzer Configuration
í
default: ErrAlarm:N,
Kybd:Y
SCSI ID Configuration
í
default: Drive :1
Changer:3
24
Equipment Description
removed or any key is pressed. (To clear an error message,
press ALT and ENTER.)
To disable the keyboard beep, use the
Kybd field. Use
Press ENTER to make the changes effective or press ESC
to return to previous menu item.
SCSI ID Config
Lets you select the SCSI ID for the drive and the robotics on
the VLS.
Use
or
to select the desired field. Drv is the drive, and
Changer is the robotics unit on the VLS. Use
scroll to the desired ID for that particular element. Press
ENTER .
SCSI ID changes entered do not take effect until you
cycle power on the VLS unit.
See the section titled Connecting More than One VLS in
Chapter 2: Connecting the VLS noting the number of SCSI
IDs required.
to select "N" to disable the beep.
Note
button to select the
and
to
Advertisement
Table of Contents
