Removing A Cartridge From The Magazine; Storing The Magazine - ADIC VLS DLT Installation And Operating Manual

Removing a Cartridge from the Magazine

Storing the Magazine

42
Operation and Maintenance
p
Open the VLS door.
p
Press the UNLOAD button on the drive front panel (see
figure 13).
p
Close the VLS door.
key to scroll the display to the UNLOAD
Use the
MEDIUM option.
The display will now show:
Press ENTER. The VLS will unload the cartridge and
return it to the magazine.
p
Return the VLS DLT to the On-Line Mode by pressing
MENU.
Your VLS DLT library is once again ready for use.
The data cartridges easily slip into and out of the slots of the
magazine. To remove a cartridge, simply grasp it with two
fingers and pull up. Make sure each cartridge is labeled so
you know the contents (and where it belongs in the magazine
sequence).
Remember – Do not use wrap-around labels on the
individual cartridges. Most labels use a removable adhesive
and have a tendency to curl or tear after multiple uses. This
can jam the movement of the VLS. Place labels only in the
space provided on the cartridge.