Figure 21 Scalar 50 Cable
Configuration (Stacked)
Host computer
Host computer
Ethernet
The library
host and
Ethernet
network are
connected only
to the Master
library.
Initial Configuration
2 Connect one end of an AC power cable to each installed power supply and to a wall
outlet.
0
Initially configuring the library consists of the following steps:
•
Turning on the Library
•
Removing the Remaining Packing Materials
•
Setting the Library Options
•
Setting the Date and Time
•
Setting Network Information
Installing the Library
Scalar 50 (slave library)
Tape
drive 2
Scalar 50 (master library)
Tape
drive 2
Scalar 50 Tape Library
Tape
drive 1
Tape
drive 1
23