Quantum Scalar 50 Quick Start Manual page 11

Figure 6 Rail Adapter Types
Determine the type of rail adapter required for your rack. Each rail adapter is
c
marked with the specific hole type supported, either metric or standard (see
figure 6).
Use the rail adapters with
blocks on rails with square
hole patterns
Use the rail adapters with
circle pegs (opposite blocks)
on rails with non-threaded
circle hole patterns
Use the rail adapters with
small circle pegs on rails
with threaded circle hole
patterns (M6 on one side and
M5 on the other side)
Installing the Library
Scalar 50 Tape Library
11