Quantum Scalar 50 Quick Start Manual page 28

Scalar 50 Quick Start Guide
Figure 25 Setup Screen
Figure 26 Cabinet Setup
Screen
28
Setting the Library Options
To set the library options:
1 Turn on the library by pushing power button located on the bottom left-hand corner
of the OCP (see figure
2 The OCP asks you:
"Are the Shipping Restraints Removed?"
3 Press to continue.
YES
4 The OCP asks again:
"Are you sure the Hand & Thumb Screw Restraints have been Removed?"
5 Press to continue. The library continues the boot process. When complete, the
YES
screen displays.
Home
Note: If the library encounters difficulties during the boot process, there may be
obstructions inside the library. The the OCP will display:
Restraining Bolt, or Hand Restraint. See User's Guide."
library, open the doors with the emergency access tool and check for
obstructions. Be sure to check for the restraining bolt on the left side of the
cabinet (see the Scalar 50 User's Guide PN 81-81768 located on the
documentation CD for more information).
6 Press Setup from the Home screen. The OCP displays the Setup screen (see
figure 25):
7 From the Setup screen, use the up and down arrows to highlight Cabinet and press
Enter.
The Cabinet screen displays (see
Setup
Installing the Library
22).
( or
YES NO
Enter
figure 26):
).
( or
YES
"Please Remove
Shut down the
0
).
NO