Quantum Scalar 50 Quick Start Manual page 35

Figure 35 Setup Wizard
(Configuring Partition)
Figure 36 Setup Wizard
(Wizard Completed)
13 Create a partition for this library.
Note: Libraries that contain a SAS drive are limited to a single partition.
a Enter a name for the partition.
b Select a host LUN for the partition.
Enable/disable Auto Clean for this partition.
c
14 Click to continue.
Next
The
Setup Wizard (Wizard Completed)
15 Click to return to the
Exit
16 Click to reboot the library.
Utilities
The page displays.
Utilities
17 Click .
Reboot
page displays (see
page.
Status
Setup Wizard
Scalar 50 Tape Library
figure 36).
35