Quantum Scalar 50 Quick Start Manual page 15

Table 4 Back Mounting Bracket
Orientation
Installing the Library Chassis
Warning: The Scalar 50 tape library weighs approximately 52 lbs (23.6 kg). At least
two people are required to lift and install the library.
1 The back mounting brackets are lettered (A through I) so the correct mounting
position is easily determined. The mounting positions differ depending on the depth
of the rack (see table 4).
Note: If the depth of the rack is less than 27 in, do not install the back mounting
brackets or clamps.
Back mounting clamp
#2 Holes
Rack Depth
24 to 25 in.
25 to 26 in.
26 to 27 in.
27 to 28 in.
28 to 29 in.
29 to 30 in.
30 to 31 in.
31 to 32 in.
32 to 33 in.
33 to 34 in.
Installing the Library
Back mounting bracket
#1 Holes
Back Mounting Bracket
(Mounting Position)
Back bracket and clamp not
required
Back bracket and clamp not
required
Back bracket and clamp not
required
Use holes A and C
Use holes B and D
Use holes C and E
Use holes D and F
Use holes E and G
Use holes F and H
Use holes G and I
Scalar 50 Tape Library
Back Mounting Clamp
#1 Holes #2 Holes
N/A N/A
N/A N/A
N/A N/A
X
X
X
X
X
X
X
15
0