Quantum Scalar 50 Quick Start Manual page 8

Scalar 50 Quick Start Guide
Table 3 Library Mounting
Hardware
8
Qty Figure
16
8
4 metric
and 4
standard
2
4 sets
2 sets
2 sets
Installing the Rack Mount Shelves
Before installing the rack mount shelves, you must collect the following information:
• Type of rack mount rails (square hole, through hole, or threaded hole)
• Depth of rack (34 in, 86.3 cm minimum depth recommended; however, rack depths of
24 in, 60.9 cm to 36 in, 91.4 cm are supported)
Installing the Library
Part Number Description
PN 90-87203-01 Allen head screws (M5 x 10) for
shelf assembly
PN 74-87575-01 T- nuts (M5)
PN 74-88052-01 Rail adapters (both metric and
(metric) standard holes are included, 8
PN 74-88053-01 total adapters, see
(standard)
PN 74-88055-01 Right and left support shelves
(shelf) (left shown)
PN 74-88056-01
(extender)
PN 74-88054-01 Front and back rail mounting
(plate) hardware (M4 x 12 allen screws
PN 90-87203-02 and mounting plates)
(screws)
PN 74-88057-01 Back bracket hardware (M5 x 8
(bracket) allen screws and mounting
PN 74-88058-01 plate)
(clamp)
PN 90-87343-08 Back clamp hardware (M5 x 8
(screws) and back clamp)
PN 90-87275-01
(screws)
figure 6)
0