Configuring The Real Time Clock; Configuring The Log; Configuring Event Notification - ADIC FastStor 2 User Manual

OCP access pin code
Repeat OCP access pin code
Support name
Support phone
Support email

Configuring the Real Time Clock

The following parameters can be configured for the real time clock (RTC):
Label
Time
Date

Configuring the Log

The following parameters can be configured for the log:
Label
Trace Log Mode
Trace Level
Trace Filter

Configuring Event Notification

The following parameters can be configured for event notification:
Label
Notify errors
Notify warnings
To email address
Email domain
FastStor 2 User's Guide
Four digits.
This entry must match the previous entry.
Specify the name that is displayed in the support page as contact
point.
Specify the phone number to dial in case of a support request.
Specify the email address to contact in case of a support request.
Description
standard or 24 h & the month or day listed first
DD-MM-YYYY
Description
Error and trace logs can be enabled or disabled through
filtering options. Because the filters apply during log entries in
the database and are not retrieve filters, events that have
been filtered out are permanently unretrievable. Choices are
"off," "on," and "stop trace at first error."
Only the service level user can configure the trace level.
Only the service level user can configure the trace filter
options.
Description
Specify whether or not notifications of errors are to be e-mailed to
users.
Specify whether or not notifications of warnings are to be e-mailed
to users.
Specify the e-mail address used to which to send notifications of
errors or warnings. Use the format user@domain.domain_type.
The domain name to use. The autoloader itself creates the correct
email address from using this domain name as the from e-mail
address.
35