Retrieving Information; Viewing Error Logs; Displaying Cycle Count; Displaying Product Version - ADIC FastStor 2 User Manual

7 Press CANCEL to end the test.

Retrieving Information

The Information menu provides access to information about the autoloader cycle count, recent events that
occurred on the autoloader, and to the firmware level.

Viewing Error Logs

This option provides access to the autoloader errors and events (see
page 47 for a description of error codes).
1 Press + or – until Go offline appears. Press ENTER.
2 Press + or – Information appears. Press ENTER to access the available options.
3 Press + or – until Loader Info appears. Press ENTER to access the available options.
4 Press + or – until Error Log appears.
5 Press ENTER to access logged errors.
The most recent entry is number 0 and older entries are negative numbers.
NOTE:
6 Press + or – to display each error in the log. Press ENTER to access additional information about the
error.
7 Press CANCEL when done.
Refer to Viewing Autoloader Error Codes
numbers generated in the log.

Displaying Cycle Count

This option displays the total system cycle count, which increments each time a tape is loaded into the drive
or exported from the autoloader.
1 Press + or – until Go offline appears. Press ENTER.
2 Press + or – Information appears. Press ENTER to access the available options.
3 Press + or – until Loader Info appears. Press ENTER to access the available options.
4 Press + or – until Cycle Count appears.
The operator panel displays the total cycle count.
5 Press CANCEL when done.

Displaying Product Version

This option displays the overall product version of the autoloader.
1 Press + or – until Go offline appears. Press ENTER.
2 Press + or – Information appears. Press ENTER to access the available options.
3 Press + or – until Drive Info appears. Press ENTER to access the available options.
4 Press + or – until Product Rev appears. The operator panel displays the product version.
26
on page 47 for descriptions of the possible autoloader error
Viewing Autoloader Error Codes
Managing the Autoloader
on