Understanding the Menu Structure
The following graphic depicts the autoloader menu structure.
Figure 4
Operator Panel Menu Structure
Powering on the Autoloader
1
Plug the power cord into the outlet.
2
Plug the power cord into the rear panel of the autoloader.
3
Use the tip of a pen to press the ON switch as shown below:
4
Check the LCD display to make sure the autoloader is receiving power. If it is not, check the power
connections and your power source. During the Power-On Self Test (POST), all four LEDs are
illuminated briefly, followed by just the Ready/Activity LED flashing. When the initialization sequence is
complete, the LCD screen displays the main menu.
FastStor 2 User's Guide
13