Environment; Tape Drive - ADIC FastStor 2 User Manual

Table 21 SDLT-600 Autoloader Specifications
Characteristic
Number of slots
MTBF
Interface

Environment

Table 22 provides the environmental requirements necessary to operate your autoloader.
Table 22 Environmental Specifications
Characteristic
Temperature
Operating
Non-operating
Recommended operating temperature
Temperature shock immunity - maximum rate of
change
Humidity
Operating
Non-operating
Altitude
Operating

Tape Drive

Table 23 provides the requirements necessary to operate your autoloader configured with an SDLT-600
tape drive.
Table 23 SDLT-600 Tape Drive Specifications
Description
Read/write transfer rate: maximum sustained
Burst transfer rate
Average access time
Loading time to BOT (for previously written
tape)
60
Specification
8
250,000 hours
LVD Ultra SCSI, 68-pin HD connector
SDLT-600
Non-compressed mode:36 MBps
Compressed (2:1 typical): 72 MBps
160 MBps
79 seconds
12 seconds
Specification
10º to 40ºC (50º to 104ºF)
-40º to 66ºC (-40º to 151ºF)
20º to 30º C (68º to 86º F)
10º C per hour (50º F)
20% to 80% RH non-condensing
10% to 95% RH non-condensing
-152.4 to 9144m (-500 to 30,000 ft)
Specifications