Wallpaper Setting; Network Settings Page Definitions - Grandstream Networks WP820 Administration Manual

Priority checked, this feature will be enabled.
Active
The default setting is disabled.
If enabled, during active call, if incoming multicast paging has higher priority (1 is the highest) than this
value, the call will be put on hold and multicast paging will be played.
Paging
Barge
Default setting is "Disabled".
Note: The option is displayed if "Paging Priority Active" is enabled.
Multicast
Selects the codec type for the multicast paging call. The list includes: PCMU, PCMA, G.722, G.726-32,
Paging
G.729A/B, iLBC, Opus. The default setting is "PCMU".
Codec
Multicast Channel Settings
Multicast
Paging Enable or disable multicast paging.
Function
Multicast
Set multicast paging address for sending and receiving. This option requires reboot to take effect. Valid
Paging
range is from 224.0.0.0 to239.255.255.255. User can enter up to 10 Multicast paging addresses.
Address

Wallpaper Setting

WP820 wallpaper is customizable through web GUI and the user can upload up to 10 wallpapers.
Note:
WP820 support JPG, PNG, BMP format, size ≤ 2MB (Best Pixel: 240 * 320px)
Wallpaper Settings
Wallpaper Source

Network Settings Page Definitions

Bluetooth
Bluetooth
Device Name Display name when paired with other devices.
Bluetooth Enables/Disables Bluetooth headset mode. The WP820 will become a headset of the paired Bluetooth
Table 21: PTT/Multicast Settings
Configures the source of wallpaper, if selected:
● Default: use the system default wallpaper.
● Download: use the wallpaper downloaded from network, a
server path must be configured for the Directory or file
path of the wallpaper. TFTP, HTTP and HTTPS protocols
are supported.
● Uploaded: use the wallpaper uploaded from the webpage.
Table 22: Wallpaper Setting