Goosercv_Cmv Function Block - ABB RELION REC615 Technical Manual

1MRS758755 C
The CL output signal indicates that the position is closed. Default value (0) is used if
VALID output indicates invalid status.
The OK output signal indicates that the position is neither in faulty or intermediate
state. The default value (0) is used if VALID output indicates invalid status.
3.15.5.3 Signals
Table 75: GOOSERCV_INTL Output signals
Name
POS_OP
POS_CL
POS_OK
VALID
3.15.6

GOOSERCV_CMV function block

3.15.6.1 Function block
Figure 52: Function block
3.15.6.2 Functionality
The GOOSERCV_CMV function is used to connect GOOSE measured value inputs to
the application. The MAG_IN (amplitude) and ANG_IN (angle) inputs are defined in
the GOOSE configuration (PCM600).
The MAG output passes the received GOOSE (amplitude) value for the application.
Default value (0) is used if VALID output indicates invalid status.
The ANG output passes the received GOOSE (angle) value for the application.
Default value (0) is used if VALID output indicates invalid status.
3.15.6.3 Signals
Table 76: GOOSERCV_CMV Output signals
Name
MAG
ANG
VALID
REC615 & RER615
Technical Manual
Type
BOOLEAN
BOOLEAN
BOOLEAN
BOOLEAN
Type
FLOAT32
FLOAT32
BOOLEAN
Basic functions
Description
Position open output signal
Position closed output signal
Position OK output signal
Output signal
Description
Output signal (amplitude)
Output signal (angle)
Output signal
123