Ethernet Channel Supervision Schlcch - ABB RELION REC615 Technical Manual

1MRS758755 C
Parameter
LNKLIV
REDLNKLIV
3.20.1.4 Settings
Redundancy settings
Table 217: Redundancy settings
Parameter
Redundant
mode
3.20.1.5 Monitored data
Monitored data is available in four locations.
• Monitoring > Communication > Ethernet > Activity > CHLIV_A
• Monitoring > Communication/ > Ethernet > Activity > REDCHLIV_B
• Monitoring > Communication > Ethernet > Link statuses > LNKLIV_A
• Monitoring > Communication > Ethernet > Link statuses > REDLNKLIV_B
3.20.2

Ethernet channel supervision SCHLCCH

3.20.2.1 Function block
Figure 111: Function block
3.20.2.2 Functionality
Ethernet channel supervision SCHLCCH represents X1/LAN, X2/LAN and X3/LAN
Ethernet channels.
An unused Ethernet port can be set "Off" with the setting Configuration >
Communication > Ethernet > Rear port(s) > Port x Mode. This setting closes the
REC615 & RER615
Technical Manual
Values Unit Step
(Range)
Up
Down
Up
Down
Values Unit Step
(Range)
None
PRP
HSR
Defaul Description
t
Link status of redundant port LAN
A. Valid only when
is set to "HSR" or "PRP".
Link status of redundant port LAN
B. Valid only when
is set to "HSR" or "PRP".
Defaul Description
t
None Mode selection for Ethernet switch
on redundant communication mod-
ules. The "None" mode is used with
normal and Self-healing Ethernet
topologies.
Basic functions
Redundant mode
Redundant mode
211