Printronix SL4M Reference Manual page 51

the dynamic field defined in EXECUTE
mode.
format is an optional parameter to specify
the format for the passcode data. Enter B
for binary, D for decimal, and H for
hexadecimal. The default is decimal if
format is not specified.
size
A decimal number specifying the overall bit
length of the memory bank.
mem bank Specifies which tag logical memory area
that this command will be applied. If
omitted, it defaults to the EPC memory
area. Other areas include Identification,
User Data, Access area and Kill area.
Enter one of the following values:
'EPC' – EPC 12 bytes data area (default)
'TID' – Tag identification 8 bytes area
(currently not applicable for RFWTAG)
'USR' – User 32 bytes area
'ACS' – 4 bytes access code area
'KIL' – 4 bytes kill code area
'PC' – 2 bytes PC code area (Gen 2 tags
only)
Bit Field A line description of a bit field and must
have one of the following syntax formats:
1. For non-incremental data (both static
and dynamic)
length ;[DF n ;] format ;(D) datafield (D)
2. For incremental fixed data
length ;I; format ;STEP[ idir ] step ;[RPT n ;]
[RST n ;](D) startdata (D)
3. For dynamic incremental data
length ;IDF n ; format ;
length A decimal number specifying the bit length
of a field within a tag. The maximum length
for each DFn field is 64 bits for binary or
decimal format. For hexadecimal format,
the bit length can be up to the maximum bit
length specified for the corresponding
memory bank.
DF n Optional parameter to indicate this field
has dynamic data. Replace n with a
RFWTAG
51