Printronix SL4M Reference Manual page 63

Rfid labeling
Hide thumbs Also See for SL4M:
Table of Contents

Advertisement

NOTE: 1. Multiple RFRTAG commands are allowed in the same
form but the same DFn field cannot be defined multiple
times.
2. The DF field length is restricted to 64 bits for binary or
decimal format and must be a multiple of 8 bits. The sum of
all field lengths must be equal to the tag size.
3. The first field always start at the MSB bit. The bit length
of a field dictates the start bit of the next field, etc. As a
result, DF fields will not overlap each other.
4. RFRTAG does not allow incremental fields (with the "I"
prefix).
5. 432 IGP dots in the ~CREATE line specifies a 6 inch
label. 6 inches = 432 (IGP dots)/72 (dpi)
Use 144 for 2 inch labels and 288 for 4 inch labels.
Example
Same as Example 4 on page 57, except the increment
is dynamic and the result is merged into Alpha to print
on the smart label.
~CREATE;SGTIN–64;432
RFWTAG;64
2;B;*10*
3;D;*5*
14;D;*15383*
20;D;*123456*
25;IDF1;H
STOP
RFRTAG;64
64;DF2;H;
STOP
ALPHA
IAF1;16;3;12;0;0
STOP
END
~EXECUTE;SGTIN–64;ICNT1500
~IDF1;STEP+1;*0*
~IAF1;<DF2>
~NORMAL
RFRTAG
B – binary, D – decimal,
H – hexadecimal
/Header
/Filter Value
/EPC Manager Index
/Object Class
/Serial Number
63

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SL4M and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Sl5000r

Table of Contents