Enable Rfid Motion; Specify Rfid Retries For A Block - Printronix SL4M Reference Manual

Enable RFID Motion

Purpose This command enables or disables RFID paper motion.
Be default, labels automatically print at the end of the
format. This command allows you to inhibit the label
from moving.
^RM a
Format
^RM
a

Specify RFID Retries for a Block

Purpose This command specifies the number of times that the
printer attempts to read from or write to a particular
block of a single RFID tag. The number will reflect in
the Auto Retry menu.
Format ^RR a
^RR
a
Enable RFID Motion
Enable RFID Motion command.
The default is Y. The acceptable values
are Y (Yes, move the label) or N (No, do
not move the label).
Specify RFID Retries command.
The default is 2. The acceptable value
range is 1 to 9.
75