Printronix SL4M Reference Manual page 42

Chapter 2
RFID Menu (SL4M)
Tag Write Cnt
This menu item displays on the control panel's LCD the number of
tags attempted to be written since the last Clear Tag Stat operation
has been initiated. (See "Clear Tag Stat" on page 43.)
Failed Tag Cnt
This menu item displays on the control panel's LCD the number of
failed tag write attempts since the last Clear Tag Stat operation has
been initiated. (See "Clear Tag Stat" on page 43.)
Tag Read Cnt
This menu item displays on the control panel's LCD the number of
tags attempted to be read since the last Clear Tag Stat. (See "Clear
Tag Stat" on page 43.)
Non-RFID Warning
When this menu item is set to Enable, the printer checks to make
sure that non-RFID jobs are not being printed on RFID labels (to
prevent RFID labels from being wasted).
If RFID labels are installed in the printer, and a job is printed with at
least one form that contains no RFID commands, a fault will be
declared and the data for the forms that contain no RFID
commands will be absorbed.
The default is Disable.
42