Selecting The Tools - Printronix SL4M Reference Manual

Chapter 2
Software Migration Tools (SMT)

Selecting The Tools

SL5000r
1. Press
2. Press ↓ and
UNLOCKED displays.
3. Press ↑ until SMT: Status displays.
4. Press + until Enabled displays.
5. Press
6. Press ↓ until SMT: Sel Toolset displays.
7. Press – or + until the desired toolset displays.
8. Press
9. Press ↓ until SMT: Select Tool displays.
10. Press – or + until the desired tool displays.
11. Press
12. Press ↓ and
PAUSE to take the printer offline.
13. Press PAUSE again to put the printer online.
86
until QUICK SETUP displays.
↵
at the same time until ENTER SWITCH
↵
to select it. An asterisk (*) appears next to Enabled.
↵
to select it. An asterisk (*) appears next to the toolset.
↵
to select it. An asterisk (*) appears next to the tool.
↵
at the same time to lock the
↵
key, then press