Graphics Mode Enable - Printronix L7032 Programmer's Reference Manual

Graphics Mode Enable

Purpose Enables use of Graphics Mode commands.
Mode Normal
Format (cc) PY (cc)-
(cc)
PY
(cc)-
Comments
Following the PY command, the Graphics Mode commands
(page 26) are available. Once in Graphics mode, you can enter
Extended Graphics/High Resolution Mode. (See page 31 for
more information.)
For the Graphics Mode Enable command to be recognized and
accepted by VGL, the following rules must be followed:
1. If Midline PY is enabled on the printer's control panel menu,
the Graphics Mode Enable command can be placed
anywhere on a line. If Midline PY is disabled, the Graphics
Mode Enable command must be the first characters of a new
line. See your User's Manual for more information.
2. The command line must also terminate with a line terminator
(CR, LF, FF, etc.).
3. VGL absorbs all characters between the command and the
line terminator.
Example The following command enables the Graphics Mode:
Represents the Special Function Control Code
(SFCC). Enter the specific SFCC for your VGL
configuration.
Specifies the Graphics Mode Enable command;
enter PY.
Terminator. Enter the SFCC for your VGL
configuration immediately followed by - (the
Graphics Mode CR) or other valid terminator.
Graphics Mode Enable
^PY^-
103