Chapter
2
Command Codes
Forms, Deleting Dynamic (Version II)
Purpose
Mode
Format
Forms, Executing Dynamic (Version II)
NOTE: This command operates similar to the Dynamic Form Commands
Purpose
Mode
Format
94
(cc)G
Terminator. Enter the SFCC for your VGL
configuration immediately followed by G, the
universal terminator, or another valid Graphics
Mode command to end the input of the form name.
data
The form data. Enter any number of valid Graphics
or Extended Graphics command sequences.
(cc)]
Ends the form and all contents. Enter the specific
SFCC for your VGL configuration followed by the
right bracket ( ] ) to end the form.
Deletes an existing dynamic form stored in memory under a
specified name.
Graphics with an Extended Graphics Command selected
(cc) IFORM,D name (cc)G
(cc)
Represents the Special Function Control Code
(SFCC). Enter the specific SFCC for your VGL
configuration.
IFORM,D
The command to delete the form. Enter IFORM,D.
name
Represents the form name. Enter the form name
exactly as created in the IFORM,C command (page
93).
(cc)G
Terminator. Enter the SFCC for your VGL
configuration immediately followed by G, the
universal terminator, or another valid Graphics
Mode command terminator to end the data.
described beginning on page 65.
Executes an existing dynamic form stored in memory under a
specified name.
Graphics with an Extended Graphics Command selected
(cc) IFORM,E name [,DISK] (cc)G
(cc)
Represents the Special Function Control Code
(SFCC). Enter the specific SFCC for your VGL
configuration.
IFORM,E
The command to execute the form. Enter
IFORM,E.
name
Represents the form name. Enter the form name
exactly as created in the IFORM,C command
(page 93).