Lines, Solid - Printronix L7032 Programmer's Reference Manual

Chapter 2
Command Codes
^PY^-
^M01,01,000^LD0150,0154^-
^PN^-

Lines, Solid

Purpose
Mode
Format
116
Produces solid lines.
Graphics with an Extended Graphics Command selected
(cc) LS horz vert (cc)-
(cc) Represents the Special Function Control Code
(SFCC). Enter the specific SFCC for your VGL
configuration.
LS The Solid Line command. Enter LS.
horz
Normal Resolution:
Defines the horizontal line length in tenth inches
and dot columns. Enter a three-digit horizontal
length value ranging from 000 through 999 to
define a horizontal length of 00.0 through 99.9
inches and a fourth digit ranging from 0 through 9 to
specify 0 through 9 additional dot columns of
length.
VGL automatically understands the decimal
between the second and third digits for tenth inches
and automatically interprets the fourth digit as dot
columns.
For example, entering 0120 specifies a 1.2-inch
plus no-dot column horizontal line length; entering
1016 specifies a 10.1-inch plus 6-dot column
horizontal line length. This command is ignored if
either length parameter is zero plus zero dots.
lines.ex3