Table of Contents
Advertisement
PDF417 Command Format
Default Ratio:
(cc)
dir
p
type
X[D] n
Y[D] n
H n
W n
A h:w
R n
C n
(cc) dir p type [X[D] n ] [Y[D] n ] [(H n )] (W n )] [A h:w ]
[R n ] [C n ] [S n ], DATA^G
Represents the Special Function Control Code
(SFCC). Enter the specific SFCC for your VGL
configuration.
Represents the direction of the bar code. Enter B
for horizontal or C for vertical bar codes.
An optional readable data field. Enter N so no
readable data prints in this field.
Enter & for PDF417.
Optional parameter to designate the width of the
narrow element in either the default 60 X 72 dots
per inch or, if the D is given, in target dots. The
default size is 1/60th of an inch.
Optional parameter to designate the height of the
bar code in either the default 60 X 72 dots per inch
or, if the D is given, in target dots. The default size
is 2/72nd of an inch.
Optional parameter to adjust the overall height of
the bar code symbol (including human readable
data). Height adjustments are made in 0.1-inch
increments; enter H and a value from 4 through 99
to select height adjustments from 0.4 through 9.9
inches. Parameters W n , R n , C n or A cannot be
entered if this parameter is used.
Optional parameter to adjust the maximum width of
the symbol based on the narrow element width.
Enter W n ; where n is the overall width in tenths of
an inch. Parameters H n , R n , C n or A cannot be
entered if this parameter is used.
Optional parameter for specifying the symbol
height-to-width ratio where h is the height and w is
the width, both expressed as integers. The default
is 1:2. Parameters H n , W n , R n , or C n cannot be
entered if this parameter is used.
Optional parameter that specifies the number of
rows the symbol will have. Enter R followed by the
number of rows in the range of 3 through 90 in
multiples of 3. Parameters H n , W n , C n or A cannot
be entered if this parameter is used.
Optional parameter that specifies the number of
columns the symbol will have. Enter C followed by
the number of columns in the range of 1 through
90. Parameters H n , W n , R n or A cannot be entered
if this parameter is used.
PDF417
249
Advertisement
Chapters
Table of Contents
