Printronix L7032 Programmer's Reference Manual page 112

Chapter 2
Command Codes
Line Spacing Code
Example
^PY^-^F^-
Standard Characters in the Graphics Mode^*
at the standard line spacing^*
of 6 lines per inch.^*
^@L08^-Standard characters in the Graphics Mode^*
at the new line spacing^*
of 8 lines per inch.^*
^@L06^-
^O^-^PN^-
112
(cc)- Graphics Mode CR. Enter the SFCC for your VGL
configuration immediately followed by - to end the
command sequence.
Table 13. Line Spacing Codes
Line Spacing (lpi) Selected
01
02
03
04
06
07
08
09
10
12
18
72
Values above 20 (except 72) default to 18. Values
selected but not shown on the table are rounded to
the nearest value. For example, selecting a line
spacing code of 05, would be rounded up to 06.
The following example illustrates different line spacings.
1
2
3
4
6
6
8
9
10
12
18
72