Printronix L5035 Operator's Manual page 111

4. On the lower roller unit, loosen the green thumb screw. Slide
the unit to the left, and pull the unit toward you and out of the
printer.
5. Wipe off the dirt on the pickup rollers with a Toraysee cloth
(listed in Table 2 on page 80). Remove any label adhesive or
forms residue with rubbing alcohol.
1
Legend:
1) Roller
6. Install the upper and lower pickup roller units:
a. Align the shaft pin with the slot in the coupling, and align
the alignment pin on the unit with the hole in the frame.
Cleaning The Cut Sheet Option Rollers
111