Table of Contents
Advertisement
Chapter 2
Loading Paper
The following table lists the available standard settings for the cut
sheet paper feed cassette (O = plastic insert; --- = no insert):
Paper size
Legal
Ledger
A3
B4
Letter
A4
Custom Size
(variable length - 7.0 in - 12.0 in.)
(variable length - 8.3 in - 19.6 in)
Cut Sheet Tray Linking (Optional Procedure)
If your printer is equipped with the cut sheet paper feed option, you
can use Tray Linking. Tray Linking is disabled by default. With Tray
Linking enabled, when the active cut sheet paper tray runs out of
paper, the printer will automatically switch to the other paper tray
and continue printing.
To enable or disable this feature, see the Tray Linking option on the
Paper Control menu. Refer to the User's Manual for details.
NOTE: We recommend that you disable Tray Linking if the two cut
If the cut sheet trays are of different sizes, and Tray Linking is
enabled, the printer will not switch to the alternate tray when the
first tray runs out of paper, nor will it display the usual "CUT-SHEET
PAPER EMPTY" message on the LCD. Instead, the printer stops
printing and displays the message "TRAY MISMATCH."
To clear this message, either add paper to the active tray, or insert
a matching tray in the alternate tray position. Then, press CLEAR
on the control panel.
36
IPS 12/22
---
O
O
O
---
---
O
sheet paper trays are of different sizes.
IPS 11/21
IPS 10/20
O
O
O
---
---
O
---
---
O
---
---
O
O
O
Advertisement
Table of Contents
