Table of Contents
Advertisement
Chapter 5
System Status And Error Messages
a. The printer beeps and briefly displays the following
b. The printer then redisplays the original fault message, or
c. Attempt to clear the fault condition again, or contact your
•
If the fault is cleared, and if you do not need to reload the paper
into the tractors (for example, the printer ran out of toner):
a. The printer goes OFFLINE.
b. Press ONLINE to resume printing.
•
If the fault is cleared, and if you need to reload paper into the
tractors (such as after a paper jam), the following message
appears:
a. Reload the paper onto the tractors.
b. Press CLEAR.
c. Press ONLINE to resume printing. Note that pages have
•
If the fault is cleared, and if you already have reloaded the
paper while clearing the fault condition (in Step 2), the following
message appears:
140
message:
Faults Not Cleared
any other uncleared fault message.
service representative.
Reload Paper
in Tractors
been lost.
Not Reprinting
Failed Pages
Press ONLINE to resume printing. Note that pages have
been lost.
Advertisement
Table of Contents
