Chapter 4
General Cleaning
CAUTION
Do not scratch or place your hands directly on the cover glass.
Fingerprints on the cover glass or lamps will cause them to
break.
9. Using the fuser cover glass scraper (listed in Table 2 on page
80) remove the dirt and toner buildup on the cover glass
surface.
10. Wipe away any remaining toner or dirt with a Toraysee cloth
(listed in Table 2 on page 80).
11. Remove the two screws that secure the lamp duct filter unit to
the fuser, then remove the lamp duct filter unit and the foam
gasket.
108
Legend:
1)
Scraper
2)
Cover Glass
1
2