Table of Contents
Advertisement
Chapter 3
Replacement Intervals
15. Carefully pull the old drum out along the drum auxiliary rod.
Hold the front and back sides when the drum is nearly out of
the printer, and remove it with both hands.
CAUTION
Avoid touching the surface of the drum with your hands,
which reduces the life of the drum.
16. Pack the old drum for shipment using the original packaging
material, and close the cover of the box.
17. Wipe the drum shaft clean with a cloth.
18. Remove the new photoreceptor drum from its package. Do not
discard the packaging material, as it will be needed for future
drum disposal.
NOTE: The sides of the drum are identical; there are no front or
CAUTION
Exposing the drum to light shortens its life. Do not expose the
drum to direct sunlight, and install it within five minutes under
typical room lighting conditions. When removing the drum
from its packaging, do not touch the surface of the drum,
because fingerprints and scratches can damage the surface
and cause poor print quality.
68
Legend:
1)
Drum
back sides. Wipe inside the endcaps of the drum with a
cloth to ensure that they are clean.
1
Advertisement
Table of Contents
