Table of Contents
Advertisement
4. Open the left and right tractor gates and place the paper about
half-way onto the tractor pins. Do not push the paper past the
Place the fanfold paper box under the tractor unit.
5. Pass the leading edge of the paper between the lower paper
guides, as shown in the illustration above.
IMPORTANT
To prevent jams, place the first fold of the paper face toward
the printer as shown.
6. Unlock only the right tractor by pushing forward on the tractor
lock.
7. Open the left and right tractor gates and place the paper about
half-way onto the tractor pins.
IMPORTANT
Do not push the paper past the tractors into the area of the
paper jam sensor.
8. Close the left tractor gate.
9. Move the right tractor to the left or right until its pins line up with
the holes in the right edge of the paper, then close the right
tractor gate.
NOTE: When you place the paper on the tractors, you should
10. Lock the right tractor with the tractor lock.
introduce a slight amount of side-to-side tension into the
paper. The right tractor must be set far enough to the right
so that there are no wrinkles, looseness, etc. in the paper.
Be careful not to set the right tractor too far to the right,
however, as too much tension may cause the paper holes
to tear away from the tractor pins.
31
Advertisement
Table of Contents
