Table of Contents
Advertisement
Chapter 3
Replacement Intervals
14. Rotate the developing roller knob counterclockwise until the
unit drops into its final resting position. The positioning pin
should protrude through the main body of the developing unit.
15. Rotate the developing unit lever fully counterclockwise to lock
the developing unit in place.
16. Reinstall the upper inner cover, and secure it with the three
thumbscrews. (See page 58.)
17. Close the waste toner recovery unit and ensure that it latches.
18. Close the printer front cover.
78
Legend:
1)
Positioning Pin
2)
Lever
3)
Developer Roller Knob
1
2
3
Advertisement
Table of Contents
